WHAT EXACTLY IS A WATER PIPE PERCOLATOR or DIFFUSER?

Percolators and diffusers are the right components of a water pipe or bong that make the water bubble. The way that is simplest to describe how they work and also the best comparison i possibly could think of is a beverage in a cup with a straw. Remember when you were a young kid and also you would blow in the straw which will make bubbles? Well that’s what is happening whenever you hit your bong however in reverse. Rather than blowing through the straw (which would function as bowl and stem,), you’re creating a seal regarding the entire cup (the mouth piece of the bong) and sucking (inhaling) to make air through the top of the straw (the bowl) into the bottom for the straw (the percolator). That’s right. You were having fun with percolators they were before you even knew what!

What’s the reason for a percolator?

In order to produce smoke or vapor, your material needs to be heated. So you can imagine the smoke or vapor is pretty warm, even hot. Percolators and diffusers force smoke or vapor to pass through chilled water. This not merely cools the smoke, but additionally filters out any ash that falls through the bowl along with a number of the resins that are harsh. Percolators and diffusers provide a smoother smoking experience. There are many forms of percolators, which provide different degrees of diffusion. Below we cover several of the most ones that are popular.

Sort of Percolators

A percolator is as straightforward as a hole that is single in water (such as the straw example above). However it may also be a whole lot more complex than that. We’re going to go over typically the most popular ones below you start with the best ones and dealing our way down to a few of the more ones that are complex.

Natural & Single Hole

This is basically the simplest type of percolator. It’s only one hole. The size of the opening varies. The hole may be located at the conclusion of a removable downstem or even the bottom of a fixed stem. This kind of percolator provides diffusion that is minimal leaving the flavor unaffected.

Multiple Holes and Slits

This type is the stepping-stone towards the more percolators that are advanced. Just as the previous type, they’ve been located towards the end of a removable downstem or bottom of a fixed stem. On fixed stem bongs, they’ve been described as “screen percs” and in most cases have only holes. There might be less than 2-holes or as many as 10 slits. If not a mixture of the both. The more slits or holes the greater amount of diffusion.

Showercap

No, you don’t put this percolator on your own head, but you do put it in your bong! This sort is kind of like a multi-slit perc. You can find a few specifics that make it a showercap. One, it really is blown out a little so it creates a round or oval shape. Two, the slits are put parallel towards the stem, in the place of perpendicular. This perc creates a fair number of diffusion. You will discover this perc used in designs from many different brands like Silika, Custom Creations, Grav Labs Glass, and more.

Circ

This perc may be the exact concept that is same of showercap with a couple of subtle differences. Circ percolators are larger and generally are connected to the bowl’s joint from the side instead on straight out of the top. They are also only found in fixed stem style bongs. Custom Creations Glass makes use that is great of perc in a variety of bong styles.

Inline / Stemline

This is perhaps one of the most percolators that are popular. It is highly functional and offers a good amount of diffusion. The inline is a perc that sits horizontally inside a fixed stem bong. It offers multiple slits placed on either the most notable or bottom. Sometimes these slits are gridded to create a lot more diffusion bubbles! Have a look at JM Flow Glass for a few quality gridded stemline options.

Matrix / Puck

The matrix percolator is built for max diffusion. It’s shaped like a puck and can be incorporated into a water pipe a true number of different ways. It’s a tremendously complex style and I’m not even entirely sure how it really is constructed. But one thing is for sure. It works incredibly well. They create a lot of diffusion bubbles, so if you’re trying to find something that will deliver as smooth as possible of a hit, this might be a great choice! You might also desire to check out Kush Scientific’s Puckline and Puckolator for similar design and function.

Showerhead

A showerhead percolator is generally found in a double chamber glass bong into the chamber that is second. It is sometimes described as a “dome perc”. It ‘s as being similar to a circ perc, but placed in to the second chamber of a bong. There are many slight changes made to your design which will make this work. First the perc has to be elongate so it’s taller. It really is then placed over an inner tube connecting to your first chamber. When air is forced through the inner tube, the “dome” redirects it through the slits, which are submerged in water. Have a look at MAV Glass for a few great samples of well executed showercap percs.

Tree

A tree percolator is comparable to a dome perc. Rather than placing a “dome” on the inner tube, small tubes, or “arms”, are welded into the inner tube. This creates a ring of mini single-hole downstems round the inner tube. Tree percs are usually a little “chuggy” and provide lots of diffusion. Although you will mostly begin to see the percs into the second chamber of a double chamber tube, they are also incorporated into the first chamber. Grav Labs uses this perc for a true number of the glass bong and water pipe designs.

Ratchet / Sprocket – Disc Percs

The ratchet or sprocket perc could be the disc that is first we have mentioned up to now. It’s a kind of perc that is round like a disc and placed in the can (body) of a water pipe. Once the pipe is hit therefore the water rises, the disc breaks up the water creating diffusion that is glorious. This perc is shaped like a sprocket or ratchet. This type of perc offers a medium level of diffusion. It’s great for oils or someone smoking herb that wants some nice percolation, but does not want the effort of cleaning tiny crevices. Grav Labs and Custom Creatons Glass both have a nice choice of ratchet and sprocket percs.

Turbine

This disc perc is pretty cool. First off, it spins the water into a vortex! Awesome! So now you could be thinking, “well, this is certainly cool, but i’d like something which has the function that is best, not merely cool tricks.” If the water travels through a turbine perc it not just diffuses the air (smoke) passing through it, but also spins the water. This spinning action creates “centrifugal force”, which forces the water outwards towards the sides associated with the can (body). What I’m getting at may be the spinning action keeps the water from going to the mouthpiece. That’s right, it’s a percolator and a splashguard. Two within one! Have a look at Grav Labs and JM Flow Glass for a nice lineup of turbine perc tubes.

Honeycomb / Mesh

This kind of disc perc produces high quantities of diffusion. They will have many holes (40+) that create a cluster of tiny diffusion bubbles. There are a few different techniques used to create this style, but the email address details are the same, a lot of bubbles and extremely smooth smoke. This might be the most percolators that are popular Dab Lab customers. M&M Tech and Grav Labs Glass utilize this perc in everything from small dab rigs to flower that is large.

Frit

If you’re trying to find absolutely the most diffusion from an individual percolator, this is definitely it. It’s like a Honeycomb or Mesh Disc perc on steroids! This perc is made with frit (crushed glass). It’s placed into a mold and melted together creating pockets that are tiny the water and air to pass through resulting in a lot of tiny diffusion bubbles. Although, this perc does come with some cons. Because the holes and pockets are so tiny, this percolator tends to clog pretty quickly, especially without an ash catcher. It can also be a bit tough to clean. That being said, we have had a great deal of customers absolutely love them! Take a look at Grav Labs Glass in case your thinking about a frit disc perc water pipe.

Pillar

The pillar perc is comparable to a tree perc, with a couple of differences that are minor design and function. Like the tree perc it consists of smaller tubes surrounding a center tube. As opposed to air and water exiting through the base of the outer tubes, it exits thought the utmost effective, resulting in a tremendously hit that is chuggy high diffusion. Vertigo and Leisure Glass both incorporate this percolator into recycler bubblers. The pillar perc and recycling functionality is a match produced in heaven! Give it a look for yourself….

Diffusion Pump

This really is another very unique percolator. It takes the essential idea of a hole that is single and turns it into something special. It’s shaped like a “U” and has a special“ball that is little that hangs off the bottom associated with curve. As you strike the pipe, the smoke goes most of the way through the stem, staying submerged in water since it gets mixed with more diffusion bubbles developed by the glass ball check valve. The ball system at the end helps recycle the water around and keep it from going up in to the mouthpiece. The vapor passes through about 6 inches of water in the tube while also being diffused by the system that is recycling the stem. This perc gives a very smooth hit and lots of flavor for such small chamber volume that is overall. Also, having the ability to put so much water in the chamber keeps it fresher longer. Check out the Diffusion Pump Bubbler by Grav Labs Glass.

Fab Egg / Swiss

A Faberge Egg Perc is a sophisticated version of a perc that is swiss. So start that is we’ll covering precisely what a swiss perc is and just how it really works. A water pipe with a flattened is had by a swiss percolator can (body) with a lot of holes going directly through it like “swiss cheese”. These holes force the water to split up in various directions creating diffusion bubbles. A fab egg perc uses the same concept and pushes it from 2D to 3D by placing a glass bubble within a glass bubble and connecting the 2 using the swiss perc technique. This not only makes one of many coolest looking rig designs in the world earth, but it leads to a highly functional water pipe. A hit that is unique with a fair level of diffusion, cooling your smoke perfectly while still leaving the flavor intact! Have a look at Brandon Clark, Chip Glass, and Logjam Glass for a few quality that is top and fab egg perc designs.